Hyster Heavy Forklifts
Hyster Company has always produced some of the best pneumatic tire lift trucks in the 19,000-36,000 pound range. With the introduction of innovative Tier 4 Final solutions from Hyster, we have set the bar even higher with the H190-280XD. Your job has become more demanding and the H190-280XD is up to the task. This Hyster® truck series is designed for heavy duty applications requiring high capacity and performance.
- The H190-280XD features a Cummins QSB 4.5L diesel Tier 4 Final diesel engine with a turbocharger and intercooler mated to a powerful 3 – speed ZF WG 161 powershift transmission. EPA Tier 4 Final compliant with a Selective Catalytic Reduction (SCR) system using Urea (Diesel Exhaust Fluid), a Diesel Oxidation Catalyst (DOC), and a dosing module for urea injection.
- Right-sized powertrain displaces less fuel and delivers superior fuel consumption and a Lower Total Cost of Ownership (TCO).
- On-demand cooling featuring a quad-cooler with four separate cooling cores (engine, transmission, charge air cooler and hydraulic system). The cores are horizontally stacked and are individually replaceable. The integrated hydraulic cooler maintains normal system operating temperatures at high ambient temperatures.
- Robust mast and front end design for a variety of applications in lumber, steel, concrete and general cargo applications. Designed for versatility with various front end attachments providing solutions in various industry segments.
- Ergonomically advanced interior – the cab is designed around the operator for great visibility and maximum operator comfort.
- Ease of serviceability for daily checks and routine maintenance with powered cab tilt and dual gull wing profile – Access key components in seconds.
Current Inventory:
62,000 lbs @ 48″ load center, 1998 H620F Hyster Heavy Forklift, Two Stage mast is 184″ down and 172″ raised
side shift and fork positioner , 8′ forks Pneumatic Tire 4 Wheel Sit Down
7800 hours on meter full cab with heat and ac
____________________________________________________________________________________________________________________________________
62,000 lbs capacity @ 48″ load center, 2008 H620F Hyster Heavy Forklift
PNEUMATIC 192-172 Standard 2-Stage mast, 96″ Forks Sideshift and Fork Positioner
2100 Hours Cab w/ heat and AC Location: TX
____________________________________________________________________________________________________________________________________
55,000 lbs capacity @ 48″ load center, 1996 550F Hyster Heavy Forklift
PNEUMATIC 155-124 Standard Mast Sideshift Fork Positioner 96″ Forks
New engine installed 2015 with less than 1000 hours curent
Cab w/ heat
____________________________________________________________________________________________________________________________________
55,000lb @ 36″ load center, 1998 H550FS , short wheel base forklift, 8900 Hours
mast 157″ down and 124″ raised , side shift and fork positioner ,96″ forks full cab , s.e. usa
____________________________________________________________________________________________________________________________________
44,000 Lb Capacity @ 36″ Load Center, 1995 H440FS Hyster Heavy Forklift
PNEUMATIC 2 Stage Mast 124.5″ Raised / 155″ Lowered Independent Forkpositioner 96″ Forks
Approx 4500 hours
_____________________________________________________________________________________________________________________________________________
36,000lb, 1997 H360XL Hyster Heavy Forklift 2 stage mast 147” lift / 143” lowered
Fork Positioner 96” forks. Perkins Diesel Foam filled tires
New Paint Hour meter shows 2,189 hour
_____________________________________________________________________________________________________________________________________________
30,000lb, 2008 H300 HD Two Stage Mast 163/183″ lift with side shift , 8′ lumber forks
Pneumatic Tire 4 Wheel Sit Down NC
_____________________________________________________________________________________________________________________________________________
33,000 lbs capacity @ 24″ load center, 2003 H330HD PNEUMATIC
190-244 Standard mast Sideshift 96″ Forks
Cummins 5.9 Diesel
Solid pneumatic tires Cab TX
_____________________________________________________________________________________________________________________________________________
28,000, 2014 H280HD PNEUMATIC 183” lift height / 161” lowered
Sideshifting fork positioner Brand New 96” forks 10,500 hours
Like new Solid pneumatic tires Cummins Diesel Cab with AC
Like new Solid pneumatic tires SW USA
Side Shift, 96″ forks Pneumatic tires
28,319 hours
Engine and transmission rebuilt 10,000 hours ago
Pneumatic Tire 4 Wheel Sit Down open cab
_____________________________________________________________________________________________________________________________________________
36,000# capacity at 24” load center, 2004 HYSTER H360HD, Diesel (Perkins)
2 stage mast 147” lift / 143” lowered, SIdeshifting Fork Positioner, 96” forks, Good tires (85%)
9,006 hours
_____________________________________________________________________________________________________________________________________________
30000# Capacity, 1993 HYSTER H300XL, Two Stage Pneumatic Tire 4 Wheel Sit Down
Diesel,ull cab , side shift and slope pyler , 8′ forks
8012 hours
_____________________________________________________________________________________________________________________________________________
36,000 lbs capacity @ 24″ load center 1996 Hyster H360XL
143-147 Standard 2-stage mast, Diesel, Sideshift, Pneumatic tires, 96″ Forks
7500 Hours
_____________________________________________________________________________________________________________________________________________
| 36,000# capacity at 24” load center, 2004 HYSTER H360HD
Diesel (Perkins), 2 stage mast 147” lift / 143” lowered, SIdeshifting Fork Positioner
|
_____________________________________________________________________________________________________________________________________________
2006 HYSTER H210HD,148/147″ 2 STAGE MAST, CUMMINS ENGINE, DIESEL, CAB,
SIDE SHIFTER, FORK POSITIONER,60″ FORKS
_____________________________________________________________________________________________________________________________________________
45000 Capacity 2013 HYSTER H450, 2 STAGE MAST, PNEUMATIC, TIRE 4 WHEEL SIT DOWN
DIESEL, FULLY-LOADED WITH SIDE SHIFT AND FORK POSITIONER, 8′ FORKS WITH A SHORT 147 MAST LIFT
24,000 HOURS
_____________________________________________________________________________________________________________________________________________
36,000# capacity at 24” load center, 2004 HYSTER H360HD, Diesel (Perkins)
2 stage mast 147” lift / 143” lowered, Sideshifting Fork Positioner, 96” forks, Good tires (85%)
9,006 Hours
_____________________________________________________________________________________________________________________________________________
36000# 2014 HYSTER H360HD, 2 STAGE MAST, 144″ LOWERED, 147″ RAISED, DIESEL, PNEUMATIC TIRES
CAB W/ HEAT, A/C EQUIPPED, 5 WAY, SIDE SHIFTER, FORK POSITIONER, 48″ FORKS
_____________________________________________________________________________________________________________________________________________
36,000# @ 48″ load center, 2016 HYSTER H360HD-1200, Three Stage, Pneumatic Tire 4 Wheel Sit Down, Diesel
Rare full free Triple stage mast 140″/216″ with side shift and fork positioner , 8′ forks , full cab with heat and AC
850 hours, close to new condition .
_____________________________________________________________________________________________________________________________________________
36,000 lbs capacity @ 24″ load center, 2005 HYSTER H360HD Forklift , 143-147 2-Stage mast
Diesel, Fork Positioner, 96″ Forks
12,000 hours
_____________________________________________________________________________________________________________________________________________
33000LB 2013 HYSTER MODEL: H330HD, 2 STAGE MAST, 162″ LOWERED, 183″ MAX RAISED, DIESEL FUEL
CUMMINS ENGINE, ENCLOSED CAB, PNEUMATIC TIRES, 3 WAY HYDRAULICS, SIDE-SHIFTER, FORK POSITIONER, 96″ FORKS
____________________________________________________________________________________________________________________________________________
28000# 2012 HYSTER H280sSolid pneumatic tires, 183 / 161 mast, cab, sideshifting fork positioner, Cummins T3 engine
13900 hours
____________________________________________________________________________________________________________________________________________
28,000# 2012 Hyster H280, solid pneumatic tires, 183 / 161 mast, cab, sideshifting fork positioner, Cummins T4 engine
10400 hours.
____________________________________________________________________________________________________________________________________________
2005 HYSTER H360HD, Perkins Diesel, 2 stage mast 147” lift / 143” lowered, Sideshifting Fork Positioner, 96” forks
12,255 Hours
____________________________________________________________________________________________________________________________________________
25000#, 2004 Hyster H250HD,Two Stage, Pneumatic Tire 4 Wheel Sit Down, Perkins Diesel, 3- speed lever auto, like new solid pneumatics all the way around , full cab , 212″ total lift with side shift and fork positioner , 4′ forks
4000 hours
____________________________________________________________________________________________________________________________________________
25000# 2004 Hyster H250HD,Two Stage, Pneumatic Tire 4 Wheel Sit Down, Diesel, 3- speed lever auto, like new solid pneumatics all the way around , full cab , 212″ total lift with side shift and fork positioner , 4′ forks , Perkins Diesel
Under 4000 hours
____________________________________________________________________________________________________________________________________________
28,000 lbs capacity @ 24″ load center, 2003 Hyster H280HD Forklift, 212″ Raised fork height, Diesel,
Sideshift and Fork Positioner, Cab, 96″ Forks
3800 Hours
____________________________________________________________________________________________________________________________________________
62,000 lb@ Capacity 48″ Load Center 1996 HYSTER H620F PNEUMATIC, 168-124 Standard 2-Stage Mast
Cummins Turbo Diesel, Powershift 3-Speed Transmisson, 96″ Forks w/ Fork Positioner, Full Cab w/AC
3338 Hours
The forklifts we are currently selling are preowned by individuals in the U.S. Please look at the manufacturer’s website for information about Hyster Heavy Forklifts: https://www.hyster.com
NEED HYSTER PARTS OR CYLINDERS REBUILT? CALL RON AT (314) 409-5115