Taylor Heavy Forklifts for Sale

TAYLOR FORKLIFT:

 

We sell Taylor Heavy Forklifts and have a variety for sale, as listed below.  These heavy forklifts can be shipped within the continental US or overseas.

“Taylor Big Red” high capacity lift trucks are designed, engineered and manufactured with up-time built into every truck. Through our vertically integrated manufacturing processes and our lean manufacturing focus, we strive to manufacture the best lift truck with the lowest operating cost and the highest resale value in the industry.

Our Engineering group focuses on the customer’s needs. We listen to the industries we serve in the steel mills, concrete yards, wood mills, and port operations around the world. Because we manufacture the majority of the essential components for our lift trucks, we are able to respond to our customers changing needs with better throughput and attention to quality.

Our lift trucks are designed and manufactured in accordance with the requirements of the OSHA Safety and Health Standards (29 CFR 1910.178) and the recommendations of the Industrial Truck Standards Development Foundation/American National Standards Institute (ITSDF/ANSI) B56.1.

Current Inventory of Taylor Heavy Forklifts for Sale:

 62,000lbs 1991 TAYLOR TY620L FORKLIFT 165.6 / 216″ Three stage mast, 116.4″ forks Fork positioner
16.00 X 25 Pneumatic tires
18.880 hours,  Rebuilt TC28 transmission Cummins 6CT engine 8.3LEngine 5000 hours

1991 TAYLOR TY620L FORKLIFT

_____________________________________________________________________________________________________________________________________________

55,000LBS, 2011 TAYLOR  TX550S FORKLIFT @ 36″ LOAD CENTER
FULL FREE DIRECT LIFT TWO STAGE MAST , 89″ TOTAL LIFT WITH SIDE SHIFT AND FORK POSITIONER 54″ COIL FORKS

WILL SWAP FOR 8′ FORKS

SHORT WHEEL BASE EXELLENT Pneumatic Tire  JOY STICK CONTROLS, FULL CAB WITH HEAT AND AC

10,472 HOURS, NO PIX

_____________________________________________________________________________________________________________________________________________

40,000lb, 2002 TAYLOR  TC400L FORKLIFT @ 30″  96″ TOTAL LIFT Two Stage Mast

5- WAY VALVE , INDEPENDENT FORK POSITIONER SIDE SHIFT , 8′ FORKS

Cushion Tire 4 Wheel Sit Down (Diesel Indoor Warehouse) 

3-SPEED AUTO TTRANS, CUMMINS DIESEL WITH (SCRUBBER SYSTEM),

UNIT WILL BE CLEANED AND SERVICED

2002 TAYLOR  TC400L

_____________________________________________________________________________________________________________________________________________

45,000 LBS, 2008 TAYLOR T450M  FORKLIFT @ 36″ 

216″ MAST Two Stage WITH 5- WAY VALVE , SIDE SHIFT

INDEPENDENT FORK POSITIONER , 8′ FORKS
Pneumatic Tire 4 Wheel Sit Down
 FULL CAB WITH HEAT AND AC VERY GOOD TIRES

2008 TAYLOR T450M

_____________________________________________________________________________________________________________________________________________

40,000 lbs @ 30″ load center 2008 TAYLOR THC-400L FORKLIFT
103″ Overall lowered mast height  78″ Raised fork height

full free direct lift mast  60″ Coil forks  Fork positioner

CUSHION TIRES  Full cab with heat a/c 
Cummins 5.9 Turbo diesel w/factory air purifier/scrubber 
3-Speed auto trans

2008 TAYLOR THC-400L FORKLIFT

_____________________________________________________________________________________________________________________________________________

FOR SALE: 35,000 lbs  @48″, 2008 TAYLOR TXH350L FORKLIFT
156″ two stage mast 88″ forks Side Shift, fork positioner
 Cummins QSB6.7  11,880 hours   full cab, heat
NO PIX
_____________________________________________________________________________________________________________________________________________
35,000 LB UNIT @ 48″ LOAD CENTER, 2007 TAYLOR  TXH350L forklift
Two Stage Mast 180″  LIFT SIDE SHIFT FORK POSITIONER , 8′ FORKS
Pneumatic Tire  15,121 HOURS REPACKED SOME CYLINDERS AND NEW HYDRAULIC HOSES  CUMMINS TURBO DIESEL  
FULL CAB HEAT AND AC 

2007 TAYLOR  TXH350L

_____________________________________________________________________________________________________________________________________________

30,000LB, 1998 TAYLOR  TEB300L FORKLIFT Rough Terrain Two Stage Vertical Mast

156″ TOTAL LIFT WITH SIDE SHIFT AND 8′ FORKS BIG WHEELS ROUGH TERRIAN GREAT TIRES,

FULL CAB WITH HEAT AND AC CUMMINS TURBO DIESEL

1998 TAYLOR  TEB300L FORKLIFT

____________________________________________________________________________________________________________________________________________

2006 TAYLOR T300S forklift PNEUMATIC DIESEL, CUMMINS PWRS,

94″ FORKS, MAST 167/180 WV, PAINTED, CAB, S/S, FP, 3 SPD,

8679 HOURS

2006 TAYLOR T300S forklift

____________________________________________________________________________________________________________________________________________

45,000lb @ 30″ LOAD CENTER 2000 TAYLOR TC400L FORKLIFT, Two Stage Full Free,

Cushion Tire 4 Wheel Sit Down (Indoor Warehouse), Diesel, FULL FREE DIRECT LIFT MAST WITH 70″ OF TOTAL LIFT ,

INCLUDES THE COIL , DIESEL MOTOR WITH FACTORY SCRUBBER  

2000 TAYLOR TC400L FORKLIFT

____________________________________________________________________________________________________________________________________________

95,000lbs at 48″ LC basic capacity 2004 TAYLOR THDC955 FORKLIFT, 17ft max fork height.
New 96″ forks, Fork Positioner, Cummins QSM11 Tier III , Dana Transmission
New Paint, New fork positioner, Fully serviced and refurbished
Engine and Transmission were rebuilt 6,000 hours ago.
90 day Warranty on Engine and Transmission.

2004 TAYLOR THDC955 FORKLIFT

____________________________________________________________________________________________________________________________________________

35,000 lbs capacity at 48″ LC, 2004 TAYLOR TH350L FORKLIFT
Cummins, Pneumatic, 156″ two stage mast, Fork Positioner, 96″ forks

Full Cab, Heat, Good Running conditions
16,219 Hours 

2004 TAYLOR TH350L FORKLIFT

____________________________________________________________________________________________________________________________________________

44,800 lbs. @ 48″ LC, 1996 TAYLOR TE520M FORKLIFT,96″ forks, Mast 147″/137″ max fork height,

Side shifter & Fork positioner, 6CT8.3 Cummins diesel engine, Full cab, Back up alarm,

Warning & operating lights, seat belt, mirrors, & fire extinguisher.

Hours 8,137

1996 TAYLOR TE520M FORKLIFT

____________________________________________________________________________________________________________________________________________

25000LB, 2008 TAYLOR TX250S forklift, 2-STAGE, PNEUMATIC TIRE 4WHEEL SIT DOWN, DIESEL, PODS SPECIAL WITH THE 240″ LIFT,

WIDER CARRIAGE WITH SIDE SHIFT AND FORK POSITIONER ,8′ FORKS , FULL CAB , FADED PAINT

8100 ORIGINAL HOURS

2008 TAYLOR TX250S forklift

____________________________________________________________________________________________________________________________________________

25000#, 2008 TAYLOR PNEUMATIC TX250S forklift, Two Stage, Pneumatic Tire 4 Wheel Sit Down
Diesel, SIDE SHIFT AND FORKPOSITIONER, 8FT FORKS, FULL CAB, GOOD TIRES, FADED PAINT, LIFT RUNS OUT GREAT

2 AVAILABLE: 8000 AND 10000 HOURS, RARE LIFTS WITH 240 MAST, GREAT FOR PODS

2008 TAYLOR PNEUMATIC TX250S forklift

____________________________________________________________________________________________________________________________________________

30000# 2013 TAYLOR TCH300S forklift, Two Stage, Cushion Tire 4 Wheel Sit Down, Diesel
SHORT WHEEL BASE CUSHION TIRE FORKLIFT, 3- SPEED AUTO , FULL CAB WITH HEAT AND AC , VERY CLEAN INSIDE CAB , NEW FACTORY SUSPENSION SEAT

3400 HOURS ,   MAST IS 124″ DOWN AND 120″ RAISED , WITH FORK POSITIONER AND 72″ FORKS , WILL BE CLEANED SERVICED, AND REPAINTED 

2013 TAYLOR TCH300S forklift

____________________________________________________________________________________________________________________________________________

 30,000lbs capacity at 24″ LC, 2011 TAYLOR TX300M forklift, 8ft forks, 132″ mast, 3 way to carriage for side shift but no attachments

15,500 hours

TAYLOR TX300M forklift

____________________________________________________________________________________________________________________________________________

30,000 lbs capacity @ 24″ load center, 2000 TAYLOR THD300S Forklift, 180″ Raised fork Height,

Diesel, Sideshift and Fork Positioner, Cab, Pneumatic tires, 96″ Forks

2000 TAYLOR THD300S Forklift

____________________________________________________________________________________________________________________________________________

28000# 2006 TAYLOR T280S Forklift, Two Stage Mast Full Free, Pneumatic Tire 4 Wheel Sit Down, Diesel
 HEIGHT ON MAST IS 136″, TOTAL LIFT IS 144″ UNIT, 42″ OF FULL FREE LIFT, UNIT HAS A 5- WAY VALVE WITH INDEPENDENT FORK POSITIONER

SIDE SHIFT, 8′ FORKS, FULL CAB, CLEANED AND DETAILED, GREAT TIRES

2006 TAYLOR T280S Forklift

____________________________________________________________________________________________________________________________________________

35,000# @48 INCH LOAD CENTER 2008 TAYLOR TX350 Forklift, Two Stage, Pneumatic Tire 4 Wheel Sit Down, Diesel,

216 MAST WITH SIDE SHIFT AND FORK POSITIONER 8FT FORKS GOOD TIRES FULL CAB 

21K HOURS

2008 TAYLOR TX350 Forklift

____________________________________________________________________________________________________________________________________________

25,000# 2010 TAYLOR TX250S Forklift, Two Stage, Pneumatic Tire 4 Wheel Sit Down, Diesel

240″ MAST , 102″ CARRIAGE WITH SIDE SHIFT AND FORK POSITIONER LIKE NEW 8′ FORKS, FULL CAB WITH HEAT AND AC , GREAT TIRES ,

NEW FACTORY PAINT WITH ALL SAFETY DECALS

9100 HOURS

2010 TAYLOR TX250S Forklift

____________________________________________________________________________________________________________________________________________

30,000 lbs capacity @ 24″ load center, 1998 TAYLOR TCO300S Short Wheel-Base Forklift, 120″ Raised fork height
LP Gas (less tank), Cushion tires, 60″ Forks
5800 Hours

1998 Taylor TCO300S

____________________________________________________________________________________________________________________________________________

62,000# 1991 TAYLOR Forklift TY620L, Diesel, Pneumatic,1164 in (2956.56 cm)
Good running conditions, Height: 165.6″ / 216″ three stage, Diesel Cummins 6CT engine 8.3L, Transmission: Dana TC28, Fork Positioner.
0 hours

____________________________________________________________________________________________________________________________________________

30,000# 2004 TAYLOR Forklift T300M , Diesel, Pneumatic, Forks: 96 in (243.84 cm)
Good running conditions. Full service just done, Height: 143″/224″ two stage, Fork Positioner
2,168 hours

____________________________________________________________________________________________________________________________________________

36,000 lbs capacity @ 24″ load center, 1999 TAYLOR Forklift THD360L ,180″ Raised fork height
Cummins diesel, Sideshift and Fork Positioner, Cab, 96″ Forks
3000 Hours

____________________________________________________________________________________________________________________________________________

30000# 2006 TAYLOR Forklift T300S , Three Stage, Pneumatic Tire 4 Wheel Sit Down
Diesel , MAST 167/180 WIDE VIEW, CAP, CUMMINS DIESEL, 3 SPEED POWERSHIFT, 94″ FORKS,

PNEU TIRES, CAB, SIDE SHIFT, FORK POSITIONER, PAINTED.

8679 HRS

____________________________________________________________________________________________________________________________________________

30,000# 2011 TAYLOR TX300M Forklift, 132” mast, 96” forks, Full cab, Cummins Diesel Engine
15,530 hours

____________________________________________________________________________________________________________________________________________

25,000# capacity @ 24″ load center 2006 TAYLOR T250S Forklift, 154-180 Standard mast
Diesel, Sideshift and Fork Positioner, Cab, Pneumatic tires, 60″ Forks
13,000 hours

____________________________________________________________________________________________________________________________________________

30,000 lbs capacity @ 24″ load center, 2013 TAYLOR Forklift THC300S Short Wheelbase Forklift
124″ Overall lowered mast height,120″ Raised fork height, Diesel w/ exhaust scrubber to reduce emissions
Sideshift and Fork Positioner, Forks
3000 Hours

____________________________________________________________________________________________________________________________________________

30,000 lbs Capacity @ 24″ Load Center, 1984 TE300L TAYLOR, DIesel Fuel, Detroit 453 Motor
Auto Transmission, 180” lift 156” lowered std 2 stage mast, Independent Fork Positioner
Pneumatic Tires, 96” forks, Cab, New DTAC AC system
Hours 5224

____________________________________________________________________________________________________________________________________________

36,000 lbs capacity @ 24″ load center, 2005 TAYLOR T360L Forklift, 160-180 Standard 2-stage mast
Diesel- Cummins, Cab w/doors, No Attachments, 96″ Forks
8500 Hours

____________________________________________________________________________________________________________________________________________

40,000 lbs @ 24″ load center, 1991 TAYLOR TC400L, 120-180 Standard Mast
Perkins diesel w/factory scrubber (for clean emissions), Sideshift
Cushion tires (indoor), 96″ Forks
3400 Hours

____________________________________________________________________________________________________________________________________________

30,000#, 2000 TAYLOR THB300L, Two Stage, Pneumatic Tire 4 Wheel Sit Down
Diesel, Rough Terrain Forklift, Load Center: 24″, Turbo, Cummins 5.9, Powershift, Mast Type: 156″ Attachment: Side shift Fork

96″ Steer Axle, Hydro-Static, Fully Serviced Single Drive 1800×15 Tires 75% Steer Tires 95%

____________________________________________________________________________________________________________________________________________

30000# 2008 TAYLOR TXB300L, Two Stage, Rough Terrain (Vertical Mast), Diesel
FULL CAB WITH HEAT AND AC, MAST IS 160 LOWERED 180 RAISED SIDE SHIFT AND FORKPOSITIONER, 48 INCH FORKS

21,000 HOURS

003

____________________________________________________________________________________________________________________________________________

30,000 lbs capacity @ 24″ load center, 2013 Taylor THC300S Short Wheelbase Forklift
Cushion tires, 120″ Raised fork height, Cummins Diesel w/factory installed “scrubber” to purify emissions
Cab w/Heat and AC, Side shift and Fork Positioner, 72″ Forks
3500 Hours

2013 Taylor THC300S 1

____________________________________________________________________________________________________________________________________________

30,000 lbs capacity @ 24″ load center, 2003 Taylor T300M Pneumatic, 153-157 Standard 2-Stage mast
Diesel- Cummins Turbo, Cab w/Heat and AC, Pneumatic tires, Side shift and Fork Positioner, 96″ Forks
12,300 Hours

2003 Taylor T300M 646x570

____________________________________________________________________________________________________________________________________________

30,000# capacity @ 24″ load center 2008 Taylor TXB300L Forklift, BIG WHEEL STYLE
160-180 Standard 2-Stage mast, Diesel (NEW motor replaced last year)
Cab w/ Heat and AC, Side shift and Fork Positioner, 96″ Forks
21,000 hours

2008 Taylor TXB300L

NEED TAYLOR PARTS OR CYLINDERS REBUILT? CALL RON AT (314) 409-5115

These Taylor Heavy Forklifts for Sale are manufactured by Taylor Machine Works, Inc.  Please see their website for further information: https://www.taylorbigredforklifts.com/

or click here: 

Taylor Forklifts