BALANCE MASTERS CRANK AND WHEEL BALANCERS
We sell Balance Masters Crank and Wheel Balancers:
Balance Masters® are an ACTIVE Liquid Balancing System for a Rotating Mass. Balance Masters® works with Centrifugal force to center the Liquid and increase the weight. Using the liquid contained in these products, known as Quick Silver, you do not risk that this product will not freeze or boil at any outdoor temperature, nor will it wear out. Balance Masters® will help to reduce wear rate on steering suspension, driveline, brakes and wheel components ordinarily subjected to excessive vibration as well as help to reduce trailer bounce during hard stops, driver fatigue, improves passenger comfort and reduces costly downtime.
Balance Masters® offers a clear solution to the challenge of better performance – both for your trucks and your bottom-line profit. Any out-of-balance condition in the wheel-tire assembly creates uneven tire wear, reducing tire life. Balance Masters® will prevent this condition and increase tire life up to 50% or more. Balance Masters® are installed over the Brake drum behind the Wheel or Between the Dual wheels. Balance Masters® will STOP the CUPPING which increases tire life. This technology eliminates the lumping effects caused by shot filled hub mounted and tire fluid products. Balance Masters® also works with gravity to created down force effect to hold the tire down on the road. This gives the tire more footprint and better control in cold, icy and wet conditions.
We supply Crank Balancers & Wheel Balancers, manufactured by Balance Masters:
CRANK BALANCERS
Crank balancers mount between the crank and damper in order to remove harmonic vibrations.
3 TYPES OF CRANK BALANCERS:
- CAT
- CUMMINS
- DETROIT
WHEEL BALANCERS
3 TYPES OF WHEEL BALANCERS:
- WHEEL
- DRIVESHAFT
- FLYWHEEL
WHEEL:
SIZE: 22.5& 24.5
Parts available include:
DT 10 335 DT 404 8 7/8 DT 404 U
SA 10 335D SA 10 335MACK SA 301 SS SA 302 M
SA 303 8 7/8 SA 303 T SA 303 U SA 303 UPS
SA 97 10B SA 303 UPS 8 SA10 335
SIZE: 19.5 & 22.5
Parts available include:
DT 195 10 DT 195 11.25 DT 195 6 DT 195 8 5/8
DT 195 8 7/8 DT 195 6 7/8 DT F 53
SA 195 6 7/8 SA 195 8 5/8 SA 195 6 SA 195 8 7/8
SA 195 8 S SA 500 SA 53 SA 195 10
SIZE: 16 & 17.5
Parts available include:
DT 17 5 8 7/8 DT 175 DT NPR SA 17 5 SA NPR
DRIVESHAFT:
DRIVESHAFT SIZES AVAILABLE:
DS-2 1/2 – 2 5/8 DS-3 1/2 – 3 5/8 DS-4 3/4 – 4 7/8
DS- 2 3/4 – 2 7/8 DS-3 3/4 – 3 7/8 DS-5 – 5 1/8
DS-2 1/4 – 2 3/8 DS-3 1/4 – 3 3/8 DS-4 – 4 1/8
DS-3 – 3 1/8 DS-4 1/4 – 4 3/8 DS-2 – 2 1/8
DS-4 1/2 – 4 5/8 DS-5 1/2 – 5 5/ DS-5 1/4 – 5 3/8
FLYWHEEL:
FW-900 PERMANENTLY INSTALLED BALANCER- MUST BE SENT TO BALANCE MASTER FACTORY FOR INSTALL.